drawing at different elevations civil 3d

Extended Data Draw: Depict geometry (hatches, mtext, inserts) based on values in extended information. Edit: Edits the MapWorks extended entity data on a single object.  Dockable palette automatically shows extended data when i object is selected. Manager: Allows xdata management operations beyond a option set up of objects. Image Process Symbols: Go direct from your GPS enabled photographic camera to CAD!  Locates symbols representing GPS Photos (with EXIF information) directly from images.  Creates a hyperlink to the paradigm, projects to drawing system, rotates to view (if begetting data exists), and more. Link Inspect: Shows linked images in a resizable preview window equally you move the crosshair over objects (such as polyline business firm outlines) containing links. TMS Images: Builds insert-able images from TMS (Tile Map Service) servers.  Produce program view maps, satellite imagery or terrain images. GPS Update: Select inserts with hyperlinks and updates the GPS Exif (geotagging information) in source images.  Adds GPS properties to images that never had geotag information. Plot Rasters: Plots multiple layouts to rasters at specified resolution and creates companion world files. Resolution: Modify (lower) the resolution of a selection prepare of image while maintaining size and position. World: Inserts multiple TIF/JPG/PNG/SID images based on earth files or creates a Globe TFW/JGW/PGW/SDW file from a selected image (even rotated). Other Tools   Curves: Calculator: Dialog based tool to summate all curve parameters based on two known values. Complement: Generates the complement for a selected arc. Controlled Fit: Generates a fit arc or circles through multiple points.  Toggle or command weights with interactive feedback of the bend results. Pnt, Pnt, Pnt: Draws an arc object though three picked points in any direction. Pnt, Tan, Tan: Draws an arc through a point with ii selected tangent segments. Quick Fit: Draws a fit arc through multiple picked points along path. Rad, Pnt, Pnt: Generates an arc object from known endpoints and radius. Radius, Direction: Generates an arc object based on known Radius, Direction In/Out. Tangent: Draws a tangent arc from the endpoint of a selected line/polyline segment. Depict: Map Grid: Draws a map grid with optional lines/tics and labels. Network Buffer: Creates buffer polylines effectually line network. Bespeak File: Draws the contents of an Ten,Y,Z ascii file equally points. Polyline Midway: Generates a polyline midway between two selected polylines. Slope Lines: Draws iii dimensional gradient lines between two linear objects with optional gradient arrows. Thiessen Polygons: Creates Thiessen polygons (Voronoi Diagram) from a pick of points and a boundary. Traverse: Draw polylines by distances and numerous angle options. EPA SWMM: Imports the plan view map section of a SWMM .INP file along with tables. Layer Lodge: Reorder objects by layer with simple motility upwardly/downwardly buttons, settings saved in the drawing for side by side use. Legends: Generates (and updates) a symbol legend and/or linetype legend reflecting those objects actually used in the drawing.  The symbol fable can contain normal cake inserts and/or symbols referenced past AeccCogoPoint objects. Linetypes: Quickly create symbolic linetypes (arrows, bullets, numbers, shapes, etc) or text based linetypes based on characters you enter. Map FileGDB: Import and Export *.GDB folders directly to/from CAD geometry (with extended data). Map Consign: Export drawing geometry to several formats. • Autodesk Breakline File (*.flt) • Carlson SurvCADD Polyline File (*.pln) • ESRI Generate Polyline File (*.gen) • ESRI Shape File (*.shp) • GeoJSON Open up Standard (*.geojson) • Gilded Software Blanking/Boundary (*.bln) • GPS Commutation Format (*.gpx) • MapInfo Data Interchange Format (*.mif/mid) • Moss/MX Genio String Files (*.mos) • OpenGIS Simple Features Text (*.txt) Map Import: Import major formats produced by ESRI, civil applications and government agencies. This tool allows you to select multiple files and quickly import mapping information straight into your CAD drawing.  Our Import tool has been tested with massive files, including a 3GB SHP/DBF from a major city. • Autodesk Breakline File (*.flt) • Carlson SurvCADD Polyline File (*.pln) • ContourGPS Export Files (*.csv) • ESRI Generate Polyline File (*.gen;*.ung) • ESRI Shape File (*.shp) • GeoJSON Open Standard (*.geojson) • Geography Markup Linguistic communication (*.gml) • Aureate Software Blanking/Boundary (*.bln) • Google Globe KMZ/KML Files (*.kmz,*.kml) • GPS Exchange Format (*.gpx) • LandXML Industry Consortium (*.xml) • MapInfo Data Interchange Format (*.mif) • Moss/MX Genio String Files (*.mos;*.inp) • Norwegian SOSI Spatial Info (*.sos) • NovaPoint Survey Data File (*.kof) • Open Street Map Files (*.osm) • Ordnance Survey MasterMap GZip (*.gz) • USGS Digital Line Graph (*.dlg;*.opt) The import tool can do a coordinate project during import.  Merely assign source systems for each file (some auto-detected) and a target system.  If y'all don't meet your format listed, contact us.  We are e'er looking to add boosted formats to our list. Map Publish: Publish your cartoon to KML (Google World) or HTM file using Google Maps or Leaflet to display the drawing in a browser.  Push the html file to your web server and anyone (with an internet connection) tin can view the map using any type of device or browser. Replace: Detect/Replace names and descriptions in Civil objects (such equally Alignments & Surfaces). Parking: Draw parking lot lines in rapid automation (see wink demo at left). PolyContour: Assign Elev: Assigns elevations to polyline contours by merely hitting a line across the polylines.  Turn a large apartment topo drawing into a workable 3D profile drawing in a affair of minutes! Delete Int: Deletes intermediate polyline contours.  Reduce a dataset for quicker processing when intermediate contours are not important. Elevations: Edit the elevations of polylines in a table with sorting and factor application commands. Grouping Tools: Group polyline contours under a proper noun for other operations such as PolyContour Volumes, Stage Table and Phase Graph. Characterization: Label polyline contours using CAD text linetypes.  As the polyline is edited, the label moves with the changes. Layer Index: Assigns polyline contours to specific layers based on its elevation value.  Useful for layerizing a contour map with no (or improper) layer assignments. Shape Read: Import contours from shapefiles with elevations and optionally layers assigned. Volumes: Displays boilerplate contour area volumes from selected polylines, and can generate a stage storage graph from the table.  Can also employ contours to create a Civil3D Surface for true volume results. Calibration XYZ: Scales a selection set of objects with independent ten,y,z scale factors. Symbols: A tool for managing both the symbols provided in MapWorks and your own user symbols. Previews: You can assign a calibration factor from 10% to 200% to resize the DWG preview bitmaps. Details: A single click gives you operating organisation file details forth with properties embedded in the drawing, as accessed from the DWGPROPS control. Symbols: A big collection of symbols in the areas of arrows, mining, points, road plan, shapes, trees, utility, and vehicles can exist downloaded with a single click inside the symbol manager. Text on Objects: Draw text along linear objects such every bit lines, arcs, polylines, etc.  Transform: Transform (rubbersheet) object coordinates using three known points on two systems using Affine, Helmert or Sixparm transforms. Trimble: Tool for importing symbols, layers and clarification keys from Trimble Feature Definition (FXL) files.

Audit: Audits a selection set of figures for problems such every bit self intersection, etc. Pause: Breaks a selection set of figures at specified distances, elevations, a surface, vertices, etc. Clockwise: Ready the direction of a selection set of figures to Clockwise or Counterclockwise. Shut: Closes a selection set of figures by standard close or edifice close (calculation the dorsum corner). Connect: Automatically connect points to form new figures.  Specify description matches (like EP,BC,TC) to form multiples in a unmarried process. Convert: Converts a selection set of figures to a designated type (such 2dPolylines with arcs, 3dPolylines, Splines, etc). Daylight: Draws daylight effigy and extension lines at a specified gradient to a selected surface. Delete Labels: Erases all labels on a selection set up of figures. Departure: Returns differences between a principal effigy and another figure or a surface.  Details including min/max, avg, median. Elevations: Raise, lower or flatten a selection set of figures.  Surface options to gear up at the centroid, average of elevations forth or inside effigy. Grade: Applies grading to whatever portion of a 3D effigy, adjusts elevations based on various parameters such every bit elevations entered, course, plane, or project method. Label: When toggled on, displays tics & elevations at vertices, slopes and distance forth segments.  Aids all built-in editing by showing changes from whatsoever tool used.  Loftier/Depression points are marked with suffixes like 123.45 HP and downhill is marked with arrows. Mark: Place a point object or temporary marker at the centroid, common points, elevations, origin, surface, or vertices of figures. Mirror: Mirrors a FeatureLine object with prompts like AutoCAD. Offsets: Linked: Multiple horizontal and vertical offsets created and linked to a figure.  If the figure changes past whatever functioning (such as grip editing) the offsets are updated also. Standard: Unlinked offsets of multiple figures using horz/vert distance, catamenia direction. Origin: Changes the origin point of a selected closed figure.7 Output: Output the name, northing, easting, elevation and radius values of a selection fix to various targets (Excel, Discussion, files). Points: Reports points (number, coordinates, altitude, beginning) along figures within tolerances. Project: Project from a effigy on a specified slope intersecting a surface.  Simply move around the figure picking points to generate featurelines. Remove: Convert arcs to multi-chord approximations in a selections set. Report: Displays coordinates, management/distance and curve details along with summary information. Restore: Restores true arc segments in figures with short segments approximating arcs. Calibration: Tools to scale figures to specified area, length, etc. Select: Build a choice set of figures by area, length, elevation range and other parameters. Segment: Adapt: Adjusts i end of a effigy segment to a specified slope distance, specified elevation, or intersection of a selected surface. Surface area Slide: Slides a selected segment in or out to obtain a designated expanse. Reverse: Reverses all segments of a selection fix of figures. Straighten: Straightens segments between two picked points (past removing intermediate vertices). Site: Backup stores the current site information so that the site tin can be restored at any time after being moved to some other site.  Different Civil3D's congenital in commands, the motility/copy work when multiple site figures are selected. (Requires Civil3D 2022 or college) Snap: Snaps the vertices of a selection set of figures to nearby CogoPoint locations (with specified horz distance tolerance). Subdivide: Subdivides a four indicate effigy, useful in PLSS systems. Summary: Generates a study of data on a choice set of figures, such as expanse and length, grades, elevations, etc. Traverse: Quickly draw figures primarily by distances using numerous angle options.   Very useful for house perimeters. Vertex: Commit: Commit secondary vertices on figures to primary vertices. Densify: Densify figures by specifying altitude along segments.  Converts lines/arcs to polylines. Fillet3d: Fillets a selection set of figures with corner rounding options. Insert: Rapidly insert vertices in an existing effigy with various options. Linear: Removes multiple vertices (unneeded) in a virtual directly line based on deflection. TagEdit: Unique method to edit figure vertex elevations by irresolute temporary text tags. Weed: Weed (remove) unnecessary vertices in a selection set of figures.

Breakup: Breaks linear geometry (including polylines) and removes duplicate segments. Convert: Converts a selection set of linear objects (and hatches) to parcels, obtains package name from contained text. Input: Allows the input of deed calls (bearing/distance) along with curve options.  All input is on the number pad for fast entry and the results are drawn equally each segment is completed.  You can save your input at whatever fourth dimension, make changes and replay the script in case of bad input. Details: Detailed report about a single parcel.  Includes point number and description (found at parcel signal), bearings, distances, and all curve data.  When an alignment is selected the station/offset tin can fifty-fifty exist included. Label: Select multiple (or all) parcels and label bearings, distances and bend data. Reader: Open a file containing a legal description (or paste text from clipboard) and with a single click, the bearings & distances are parsed to a filigree with coordinates and closure calculated.  Most curves are detected, including support for radial-in, radial-out.  Includes built in bend calculator for stubborn segments.  In one case closure is acceptable another click draws the boundary in CAD. Rename: Rename a selection set of parcels past specifying a find/replace string. Select: Select parcels past area range, name or site (with wildcards). Shape Read: Reads an ESRI Shapefile (Type Polygon) creating parcels and extended data (PropertyData). Shape Write: Saves bundle geometry and extended data into a ESRI ShapeFile (Blazon Polygon). Site: Lists each site with each parcel name, area, description and output to various. Summary: Includes basics such as parcel properties (like expanse) as reported by Civil3D but also has the power to collect the package bearing/distance and curve labels and do a true map check.  Tin fifty-fifty obtain the data from line/bend tables when tags (such as L1, C1) exist. Writer: Creates highly customizable Legal Descriptions directly from C3D Parcels or CAD geometry.  Contains a capable discussion processor, or you can export the description to Microsoft Word in a unmarried click. Alignment References: Fields are included allowing corners to reference a designated alignment.  Yous tin can include the alignment name, the side (left/right) and the station and offset in the description. Instant Results: Immediately upon selecting objects or a divers parcel, the results are shown to the right in our editor. Existent Closure: As each description is being generated, the calls created are collected to calculate closure. These calls are re-traversed, as if the calls were manually entered into a traverse routine to check closure. Objects Support: For quick legals, y'all can just select a closed polyline or a collection of lines and arcs to form the boundary. Starting time Paths: When you need to describe how to get to the outset of the clarification, you can choose a multi-segment polyline or a collection of lines and arcs. Acquire Descriptions: Collects all the potential descriptions from the drawing, text and mtext objects, along with description attributes from AECC points or point blocks.  When the legal is being created it looks through the potential description collection for the closest clarification found.  If information technology's inside the designated altitude, it is placed in the body of the legal (using the [PntDesc] field). Expression Fields: Dozens of fields are defined to employ as placeholders for everything from ArcLength to Time. Number Words: Instead of using digits for the results, you tin choose to use number words.

Auto Describe: Automatically connects field points with 2D or 3D linework and symbols.  Generates 2DPoly, 2DPolyFit, 3DPoly, Spline or C3D feature objects as controlled past the user for each code. ● Supports Autodesk Fieldbook, Carlson FTF, Hawkeye Point Coding, Trimble TGO, AASHTO SDMS Figure Code or Generic Connect methods. ● Works straight from selected point objects in the drawing or an external bespeak file. ● Handles bend codes to form arc segments on 2DPolys or automatically graded segmented 3DPolys. ● Establish reusable definition files for dissimilar projects or clients. Average: Averages selected points with analysis allowing creation of average signal. Centroids: Creates a bespeak at the centroid of a selection set up of objects with numerous centroid options. Clusters: Analyzes multiple clusters of (duplicate or nearly duplicate) points and removes all just one signal in each cluster. Compare: Compare designated points with all points that reside within a specified search radius. Catechumen: These tools convert other geometry into CogoPoints. Blocks: Converts blocks in the electric current cartoon to application points. Labels: Converts surface elevation labels to Cogo points. Leaders: Converts leaders with associated or nearby text to organization points. Nodes: Converts nodal objects (similar circles, inserts, points) to CogoPoints. Text: Converts text objects in the drawing to application points with the ability to obtain the coordinates from adjacent geometry such equally points, inserts, circles or even crossing lines. Blocks: Create inserts easily using (probable machine-detected) mapping of bespeak UDP to attributes.  Optionally employ a UDP to farther calibration the geometry (but not the attributes) which is not bad for copse, etc. Description Keys: Allows management, import and export of clarification keys, including directly XLSx read and write. Difference: Calculates superlative difference between points and a surface with an optional alignment reference.  Results can be added every bit Signal UDP on the existing indicate, or new points created at the difference value. Duplicates: Deletes duplicates points based on aforementioned or shut coordinates. Elevations: Sets the elevation of selected points to absolute, relative values or acquired elev from objects or a surface. Export: Exports designated points to supported file formats. File: Combine: Combines multiple indicate files into a single target file. Compare: Compares two point files with detailed comparison report. Convert Multiple: Converts multiple point files to a designated target format. Convert Text: Converts a single text file (space, comma, tab delimited) to defined format. View/Impress: Quickly view point files with details every bit file is clicked. Grid: Add together multiple points evenly spaced on a rectangular grid. Groups: Manage indicate groups including adding, deleting, renaming and more.  Quickly add together/remove points by description match, elevation range, inside linear object or window, number range, etc. Harvest: Harvests all points from a folder (and subfolders) or selected files. The source files tin can be CAD drawing files or any point database format the awarding can read.  Output to CSV, KML for Google World or HTM reports including used/unused ranges and duplicate reports. Hyperlink: Generates hyperlinks on the signal to paradigm files referenced in the description. Import: Imports points from multiple bespeak database formats into the electric current drawing.  On 2013 or higher, extended fields become point user defined properties (automatically created using file headings). Interpolated: Creates all qualifying points on line using ii points, beginning top and increment. Intersect: Intersection of Bearing-Bearing, Bearing-Distance, Altitude-Distance, iv Points. Changed: Inverses between points (pick or number), echoes coordinates, azimuths, bearings, horz/vert distance and slope. Arc: Specify a hub signal, ii target points (clockwise), also returns included angle. Normal: Simply specify two points for each inverse. Radial: Specify a hub point and a betoken range to inverse. Sequential: Continuously enter point numbers, returns full altitude at end. Leaders: Automatically extends the labels of selected CogoPoints using various methods, including radial for clusters. Line: Add multiple points (with interpolated elevation) betwixt 2 points. Listing: Quick command line table layout listing of selected points. Objects: Add points at the vertices or specified intervals forth a option fix of objects. Offsets: Add multiple points that are offsets of a line defined by two points. Radial: Add multiple points at a specified altitude around a betoken. Renumber: Renumber using ane of four methods.  Use All (Civil3D CogoPoint society), Database (order created), Increase (add/decrease to a selection) or Sequential (sequentially number a selection). Written report: Generates detailed point reports with user controlled columns.  Includes Lat/Lon and alignment station/start fields. Relieve entire written report as HTML or data tabel only to CSV, DBF, XML, etc.  As well include extended point data columns (Civil3D UDP)! Rotate: Rotate multiple points (in identify) to angle of side by side geometry. Scale: Scales points from a picked point with optional preservation of elevations. Select: Select points past number range, raw or full description, or elevation range. Fix Next: Set the point number to use for the adjacent CogoPoint added (using any process). Single: Add single points based on known or picked coordinates. Slope: Add together a signal at a picked location with meridian calculated at designated slope. Snap: Moves points perpendicular to designated linear segments, toward center on curves, snapping the point to the segment. Spreadsheet: Allows single or mass changes to indicate information in a spreadsheet grid. Stakeout: Generates a customizable report based on a specified setup and backsight point. Status: Returns used and free (bachelor) point numbers in the cartoon. ShapeFile: Import points from a ShapeFile to the current drawing. Consign points in a point grouping to a ESRI ShapeFile, including extended fields like lat/long and even include UDPs). Transform: Performs rotation, calibration and interpret based on relationships betwixt points. Traverse: Allows typed entry of raw traverse data and importing from multiple formats.  User configurable editor allows quick and easy entry of traverses in angle correct, azimuth, deflection, bearing & distance and more than.  Define loops and calculate closure.  Plots resulting points and optional traverse and sideshot lines.  Imports raw data files. • DotSoft Raw Information (*.drd) • AASHTO SDMS Project (*.prj) • Autodesk Fieldbook (*.fbk) • Leica GSI Raw Data (*.gsi) • MinePro Loop (*.lup) • Sokkia SDR (*.sdr) • Topcon FC-6/GTS-vii (*.gts7) • Tripod Data Systems (*.rw5) Wrap: Draws a shrinkwrap boundary around a option set of points. Zoom: Zooms (center) to entered point numbers and echoes coordinates. Formats: Load Formats Save Formats • AGT ProCogo Files (*.cgo;*.cgx) • AASHTO SDMS Calculated File (*.cal) • Autodesk State Desktop (*.mdb) • Autodesk Uploadable File (*.auf) • C&Thousand Survey Coordinates (*.crd) • Carlson Survey/SurvCADD (*.crd) • CivilSoft Coordinates (*.pro) • Comma Separated Ascii (*.csv) • Excel OpenXML Spreadsheet (*.xlsx) • LandXML Industry Consortium (*.xml) • Leica GSI Coordinate Extraction (*.gsi) • Microsoft Excel Spreadsheets (*.xls) • Simplicity Bespeak File (*.zak) • TDS Binary Coordinate Files (*.cr5) • TDS Binary JOB File (*.chore) • Trimble JOB XML File (*.jxl) • AASHTO SDMS Calculated File (*.cal) • ASCII Text File (*.txt) • Autodesk Uploadable File (*.auf) • Carlson Survey/SurvCADD (*.crd) • CivilSoft Coordinates (*.pro) • Comma Separated Ascii (*.csv) • dBase Database File (*.dbf) • Cartoon Substitution File (*.dxf) • Drawing Script File (*.scr) • ESRI Shape File (*.shp) • Excel OpenXML Spreadsheet (*.xlsx) • LandXML Industry Consortium (*.xml) • Microsoft Excel Spreadsheets (*.xls) • TDS (Tripod Data Systems) (*.cr5) If yous don't run into your format listed, contact us.  Nosotros are always looking to add additional formats to our list.

Catchment Study: Generates a detailed report of selected catchments with control over study columns, single click export to Excel, etc. Commands: Various processes on multiple surfaces such as rebuild, snapshot, etc. Convert Sections: Converts cantankerous sections to plan view 3dPolys along an alignment. Requires a centerline alignment and sections (every bit polylines). Catechumen Type: Convert a TinSurface to a GridSurface and vice-versa.  The original surface remains and can optionally be removed by the user. Delete Points: Deletes multiple points from a selected surface based on rules such every bit relative position. Draw Mesh: Draws a mesh object draped on an existing surface with labeling options. Meridian Labels: Add: Alignment: Adds labels along alignments at specified station parameters and multiple offsets. Objects: Adds labels at the vertices or specified intervals along a option set of objects. Convert: Convert a pick set up of inserts, points, text/mtext or AeccPoints to surface summit labels. Duplicate: Duplicates selected elevation labels to current layer and selected surface. Consign: Export a selection set of elevation labels to a comma separated values (CSV) file. Import: Import comma or infinite delimited ascii files, creating acme labels at designated locations. High/Low: Adds labels at the loftier and low points of a selected surface. Rotate: Rotates selected elevation labels to angles of adjacent geometry segments or a relative bending. Stats: Places a static mtext characterization reflecting the min/max/avg elevation of a selection set of ElevLabels. Export: Quickly export multiple selected surfaces to split up files. Extract: Chop-chop excerpt borders, contours (major & minor), faces, or points from multiple selected surfaces. Confront Tools: Tools to manipulate 3dFaces, including surface area, ready direction, normals, offsets and more. Form Path: Generate a FeatureLine along a surface at a given design slope.  This interactive tool allows you lot to specify directions to handle switchbacks and more. Grade Vectors: Generates 3D Vectors and information from cake insert pointers and attributes. Grid Reconstruct: Recreate a grid file from ortho drawing geometry such as points, lines, or 3dfaces. Import: Imports multiple surfaces (Tin can or Grid) from multiple selected files. Incremental Volumes: Calculates horizontal piece volumes at multiple specified elevations on a surface. Brand Solid: Creates a 3dSolid using relative depth, absolute elevation, or a second surface. Mass Points: Import multiple Lidar files (including binary LAS, LAZ (Compressed LAS), Leica Cyclone*.PTS, PCD & XYZ/XYZi) or any other supported surface format with data reducing constraints.  Select point cloud classification (such as footing) to limit the resulting TinSurface.  No need to jump through hoops like Recap, no demand to reduce data to a grid like MAPCREATEPCSURFACE.   Projects points between coordinate systems. Isolate by bounding object, elevation ranges, and interval.  Reduces data brunt past as much as 90%+ without sacrificing quality (for contours).  Output to cartoon points, external file or directly to a TinSurface. Additional Lidar tools include: Combine: Combines multiple lidar files into a single compressed LAZ file. Convert: Convert multiple surface file formats to Lidar LAZ files. Crop: Crops a LAS/LAZ file at the extents of a selected object, creating a new file. List: Detailed report in browser of betoken count, coordinate window, summit min/max, etc. Brand: Creates a lidar file from points on entities (including surfaces). Plot: Plots selected lidar files every bit point objects in the drawing. Pads: Generates polylines of areas where holes exist in lidar such as bldg pads. Project: Projects lidar from a source to target coordinate organisation, saves equally a dissimilar file name. Split: Splits a single large lidar tile into multiple smaller files. Tiles: Quickly draw and label the 3D bounding box of a selection of binary Lidar LAS/LAZ files. Pad Pattern: Generates a 3d (building) pad from a simple polyline at the desired elevation, including automatic daylighting to existing footing.  Simply specify parameters and select the geometry. Pond Design: Design a swimming using a starting featureline, specified side slopes and desired volume.  Creates the other featureline, two TinSurfaces and a VolumeSurface. Pond Spill: Determines contours upwards to spill point and creates a polycontour group gear up for stage table or graphs. Processor: Processes one or more surfaces to create other surfaces past factors or elevation assay (min elev, etc). Slope Labels: Add: Adds labels at the vertices or specified intervals along a selection prepare of objects. Catechumen: Convert a choice ready of inserts, leaders (from LDT), points, text or AeccPoints to slope labels. Export: Export a selection set of slope labels to a comma separated values (CSV) file. Import: Import comma or space delimited ascii files, creating slope labels at designated locations. High/Low: Adds slope labels at the high and depression points of a selected surface. Listing: Create report of n, e, gradient, style and more.  Output to drawing tables, external (CSV) files and more. Start: Add slope labels forth a selected linear object.  Options for begin/ending stations, interval and left/right offsets. Manner: Assign styles to a option set of gradient labels by designated ranges. Statistics: Collects statistics on selected surface (including extended info similar aeroplane/surface area) with numerous outputs (file salvage, list, mtext, table, etc). Style Visibility: Toggles all surfaces betwixt currently assigned style and no display. TIN Reconstruct: Recreates a Can file from drawing geometry such equally PolyMeshes or 3dFaces. Trim: Trims a Tin or Grid surface to a linear object boundary.  Really reduces (trims) the data from the surface, not just a mask. Volumes: Calculate quick triangulated volumes from CAD layers with printable report. Web Elevations: Creates a surface (or insert/export points) on a grid interval with the elevations returned past the Bing, Google, or the USGS Meridian Service. Formats: Load Deject Formats Salve Cloud Formats • ASTM E57 Bespeak Cloud (*.e57) • Autodesk Point Deject File (*.pcg) • Comma Separated X,Y,Z Values (*.csv) • Generic XYZ Mass Points (*.xyz) • Generic XYZI Mass Points (*.xyzi) • Leica Cyclone Point Browse (*.pts) • Lidar Low-cal Detection And Ranging (*.las) • LasZip Compressed Lidar (*.laz) • Point Cloud Information Ascii (*.pcd) • Topcon Betoken Cloud File (*.cl3) • Comma Separated X,Y,Z Values (*.csv) • Generic XYZ Mass Points (*.xyz) • Generic XYZI Mass Points (*.xyzi) • Leica Cyclone Betoken Scan (*.pts) • Lidar Light Detection And Ranging (*.las) • LasZip Compressed Lidar (*.laz) • Bespeak Cloud Data Ascii (*.pcd) • Topcon Point Cloud File (*.cl3) Load Grid Formats Save Grid Formats • Carlson SurvCADD Grid (*.grd) • ESRI ArcGrid Floating Point (*.adf) • ESRI ArcView Ascii Grid (*.agr) • ESRI ArcView Binary Filigree (*.flt) • Grid Exchange File (*.gxf) • MapWorks Surface Filigree (*.msg) • NGA Digital Terrain Elev Data Level 0-2 (*.dt#) • Surfer Ascii/Binary Filigree (*.grd) • VTP Binary Terrain (*.bt) • Carlson SurvCADD Grid (*.grd) • Comma Separated Values XYZ (*.csv) • Drawing Commutation File (*.dxf) • ESRI ArcView Ascii Grid (*.agr) • ESRI ArcView Binary Filigree (*.flt) • Grid Exchange File (*.gxf) • MapWorks Surface Grid (*.msg) • Surfer Ascii Grid (*.grd) • Surfer Binary Grid (*.grd) • VTP Binary Terrain (*.bt) Load TIN Formats Save TIN Formats • Autodesk Binary TIN/PNT (*.tin) • Carlson Binary Can (*.tin can) • ESRI ADF TinSurface (tdenv.adf) • ESRI ArcInfo UnGenTin (*.net) • GoCAD Tsurf Format (*.ts) • LandXML Unmarried Surface (*.xml) • Leica Terrain Model (*.trm) • MapWorks Surface Can (*.mst) • Topcon Surface Ascii Tin (*.tn3) • Trimble Tin Model (*.ttm) • VTP Intermediate Tin can (*.itf) • Comma Separated Values XYZ (*.csv) • Cartoon Exchange File (*.dxf) • ESRI ArcInfo UnGenTin (*.net) • GoCAD Tsurf Format (*.ts) • LandXML Unmarried Surface (*.xml) • MapWorks Surface Tin (*.mst) • Topcon Surface Ascii Tin (*.tn3) • VTP Intermediate Tin can (*.itf) If y'all don't see your format listed, contact u.s.a..  We are e'er looking to add boosted formats to our list.

baxtergrately.blogspot.com

Source: https://www.dotsoft.com/c3dtools.htm

Share this post